Section 6 COPY DEFAULT SETTINGS

14 Press the Recall%/Enter key. If you are finished making adjustments, press the Stop/Clear key. The operation panel will return to the display in step 2. Once you are finished accessing default items, proceed to step 19.

15 Press the Number of Copies / Zoom(+) or the Number of Copies / Zoom(-) key to set the width (short edge) of Folio paper (200 mm – 216 mm).

(F31)

16 Press the Recall%/Enter key. The operation panel will return to the display in step 2. Once you are finished accessing default items, proceed to step 19.

17 The selected setting will change each time you press the Number of Copies / Zoom(+) or the Number of Copies / Zoom(-) key. Refer to the tables under “Available default items” on page 6-1to select the number that corresponds to the desired default setting.

(F02 – F10, F12 – F14, F17 – F19, F22 – F24)

18 Press the Recall%/Enter key. The operation panel will return to the display in step 2. Once you are finished accessing default items, proceed to the next step.

19 Press the Reset/Power key. The copier will return to a copy-ready state.

6-9

Page 59
Image 59
Kyocera copier manual Copy Default Settings