Section 2 NAMES OF PARTS

Main Body

(1)

(7)

(11)

(3)

 

 

(2)

 

 

(4)

 

 

(5)

(6)

(9)

(8)

(10)

(1)Original cover

(Open/close this cover when you are setting the original on the platen.)

(2)Platen

(Set originals here for copying. Be sure to lay originals face-down and align them flush up against the left rear corner of the platen.)

(3)Original size indicator plate

(Be sure to align originals flush up against this plate when setting them on the platen.)

(4)Operation panel

(Perform copy operations here.)

(5)Upper front cover

(Open this cover when you need to replace the toner container or if a paper jam occurs inside the copier.)

(6)Front cover

(Open this cover when you need to replace the toner container or if a paper jam occurs inside the copier.)

(7)Process Unit

(Take this unit out when you need to replace the toner container or if a paper jam occurs inside the copier.)

(8)Toner container

(9)Lock lever

(Operate this lever when you need to replace the toner container.)

(10)Toner container release lever

(Operate this lever when you need to replace the toner container.)

(11)Charger cleaner

(Slide this knob back and forth when you need to clean the charger.)

2-1

Page 17
Image 17
Kyocera copier manual Names of Parts, Main Body