Kyocera copier 1, 2, 3, 4

Section 3 PREPARATIONS

3-6

1Open the multi-bypass tray towards you until you hear it

click into place.

2Pull out the multi-bypass extension and then flip it open.

3Adjust the insert guides to fit the width of the paper that is

to be set on the multi-bypass tray.

4Slide the paper all the way in, along the insert guides, as

far as it will go.

IMPORTANT!

• Only set paper on the multi-bypass tray when you are

planning to use that tray to feed paper. DO NOT leave

paper on the multi-bypass for long periods of time.

• When you are setting paper on the multi-bypass, make

sure that the side to be copied onto is facing upward.

• When using 8 1/2" × 14" (Legal), 8 1/2" × 13" (Oficio II)

or Folio size paper, it is recommended that you load

that paper into the drawer(s) and have paper fed from

there. If you do need to use the multi-bypass tray and

such paper does not feed smoothly, continue to support

the paper by its trailing edge until all of the paper has

been fed into the copier.

Contents

Main Page i Introduction to this Operation Guide Symbols in this guide ii CONTENTS Page iv About the International Energy Star Program Low Power Mode Off Mode Paper Recycling v Page 1-1 Section 1 IMPORTANT! PLEASE READ FIRST. CAUTION LABELS NOTE: DO NOT remove these labels. 1-2 INSTALLATION PRECAUTIONS Environment Power supply/Grounding the copier Handling of plastic bags 1-3 PRECAUTIONS FOR USE Cautions when using the copier 1-4 Cautions when handling consumables 1-5 SAFETY OF LASER BEAM 1-6 1-7 LIMITED WARRANTY FOR NEW COPIER MODEL 1500 KYOCERA MITA AMERICA, INC. Page Section 2 NAMES OF PARTS Main Body Page Page Operation panel Section 2 NAMES OF PARTS 2-5 Initial mode Auto Clear function Auto Drawer Switching function Page 3-1 Section 3 PREPARATIONS Loading paper Note when adding paper Loading paper into a drawer 3-2 1 2 3 4 Page Page 3-5 4 Setting paper on the multi-bypass tray 3-6 1 2 3 4 3-7 1 2 4 5 3-8 1 2 3 3-9 Thick Paper mode 1 2 1 Attaching the face-up tray 3-10 2 4-1 Section 4 BASIC OPERATION Basic copying procedure 1 2 3 5 6 7 8 4-3 9 1 2 3 Making enlarged and reduced copies 4-5 1 2 3 Available magnification ratios (in the order they can be scrolled through*) Low Power mode 4-6 Off mode 4-7 More about the Off mode Page 5-1 Section 5 COPY FUNCTIONS 2-in-1 Layout modes Page Page Page Section 5 COPY FUNCTIONS 5-5 4-in-1 Caution on setting the originals 1 2 Page 4 1 2 4 Page Section 5 COPY FUNCTIONS 5-10 Registering the program 1 Program function 2 3 Using programmed settings to make copies 1 6-1 Section 6 COPY DEFAULT SETTINGS Available default items 6-2 6-3 6-4 6-5 6-6 1 Accessing and changing the default settings 2 4 Page 6-8 8 9 10 11 12 Page 6-10 20 21 22 23 24 28 29 30 31 32 1 (1) (2) (3) 2 3 Checking the total copy count and printing out a report Section 7 OPTIONAL EQUIPMENT (3)(2) (4) (5)(1) Document Processor Acceptable originals Notes on acceptable documents 1 2 7-3 Setting originals on the platen 1 2 3 DO NOT leave the Document Processor open as there is a danger of personal injury. 7-4 Paper Feeder Additional Memory 8-1 Section 8 TROUBLESHOOTING If one of the following indications is displayed Indication Procedure Reference 8-2 Indication Procedure Reference If paper jams Page Page Page Page Page 8-9 If other trouble occurs Trouble Checkpoint Procedure Reference 8-10 Trouble Checkpoint Procedure Reference 9-1 Section 9 MAINTENANCE AND OPERATION INFORMATION (a) Cleaning the copier 9-2 1 2 3 Replacing the toner container DO NOT attempt to incinerate the toner container. Dangerous sparks may cause burns. Page 9-4 9 (C) (C) (A) 10 Cleaning the charger and the registration roller Page Specifications 9-6 Main Body 9-7 Document Processor (option) Paper Feeder (option) Additional Memory (option) Environmental Specifications 9-8 9-9 Available options Optional equipment 9-10 Appendix: Functions and settings combination chart Function selected first Function selected second Index Numerics A B C S T U W Z