Section 3 PREPARATIONS

Attaching the face-up tray

When copying onto special paper, such as thick paper (90 g/m² – 163 g/m²) and OHP transparencies, ALWAYS use the face-up tray. The face-up tray has a storage capacity of 30 sheets of standard copy paper (80 g/m²) but only 1 sheet of special paper should be stored there at one time.

2 Perform the standard copying procedure. Finished copies will be ejected onto the face-up tray.

1 Open the face-up tray (located at the rear of the copier).

NOTES

Finished copies will be ejected face-up.

Copies will be stored in reverse order on the face-up tray.

IMPORTANT!

ALWAYS be sure to close the face-up tray after use. NEVER leave the face-up tray open.

3-10

Page 32
Image 32
Kyocera copier manual Attaching the face-up tray