Section 5 COPY FUNCTIONS

Program function

By registering often used settings in advance as a single program, it is possible for you to make copies using those same settings by simply pressing the Program key.

NOTE

A single combination of copy modes and other functions displayed on the operation panel can be registered as a program using this function.

Registering the program

1 Set the desired copy modes and functions that you want to register as the program.

2 Press down on the Program key for at least 3 seconds.

3 The Program indicator will flash twice and registration of the program is complete.

NOTES

Copying is now possible at any time using the settings that were registered as the program.

If you want to clear the settings that are currently registered as the program, simply press the Reset/Power key while the Program key is lit.

Using programmed settings to make copies

1 Press the Program key. The Program indicator will light and the registered settings will be shown on the operation panel.

2 Make copies as desired.

5-10

Page 50
Image 50
Kyocera copier manual Program function, Registering the program, Using programmed settings to make copies