1.1. Positioning the Printer
Chapter 1
Installing the Printer
This chapter explains how to unpack and install the printer. The topics covered are:
Positioning the printer
Unpacking and inspection
Names of parts
Setting up and interfacing
1.1.Positioning the Printer
Clearance
Allow at least the necessary minimum clearance around the printer (see below). A total space of 92 cm by 61 cm by 138 cm (36 by 24 by 54 inches) is needed.
30 cm (12 inches)
30 cm (12 inches) 
40 cm (16 inches)
[20 cm (8 inches) when the
* Optional with the
60 cm (24 inches) | 25 cm (10 inches) |
Places to Avoid
Avoid installing the printer in locations subject to:
❒Direct drafts of hot or cold air
❒Direct drafts from outside (Avoid locations near doors leading outside.)
❒Sudden temperature or humidity changes
❒Sources of high temperature, for example, near stoves or radiators
❒Excessive dust
❒Vibration
❒Ammonia or other harmful fumes. (If you are planning to fumigate the room, or make liberal use of insec- ticide, remove the printer first!)
❒Excessive sunlight or humidity
❒Lack of ventilation
❒Low air pressure, e.g., located more than 2000 meters (6500 feet) above sea level