Symbolic Indicators, Indicator Name Description | Kyocera 3750

2.1. Control Panel

Symbolic Indicators

The symbolic indicators light during normal operation and when the printer needs attention.

	Indicator				Name	Description

						Flashing: Indicates the possibility that paper may be jammed at this
					Face-down	point, open and remove any jammed paper. See Section 5.6.
					Face-down	Lit: Indicates when printed pages are delivered to the face-down out-
					stack indicator

						put tray.
						put tray.

						Flashing: Indicates the possibility that paper may be jammed at this
					Face-up	point, open and remove any jammed paper. See Section 5.6.
					Face-up	Lit: Indicates when printed pages are delivered to the face-up output
					stack indicator

						tray, or to the option stacker if installed.
						tray, or to the option stacker if installed.

						Flashing: Indicates there is insufficient toner.
					Toner indicator	Lit: Indicates that the printer is out of toner. Replace with a new toner
						container.
						container.
						See Section 4.1 .

						Flashing rapidly: Indicates the possibility that paper may be jammed
					Cassette feed	at this point, open and remove any jammed paper. See Section 5.6.
					Cassette feed	Flashing slowly: Indicates that the printer is out of paper. Load more
					indicator
					indicator	paper.
						paper.
						Lit: Indicates when paper is fed from the paper feed cassette.

						Flashing rapidly: Indicates the possibility that paper may be jammed
						at this point, open and remove any jammed paper. See Section 5.6.
					MP tray indicator	Flashing slowly: Indicates that the printer is out of paper. Load more

						paper.
						paper.
						Lit: Indicates when paper is fed from the MP tray, or the option enve-
						lope feeder if installed.

						Flashes when a memory error has occurred. (See Table 5.3.) Lights
		ON LINE			On-line indicator	when the printer is on-line. The printer prints received data. Goes off
						when the printer is off-line. The printer stores but does not print


						received data.

						Flashing: Indicates data transfer is taking place.
		DATA			Data indicator	Lit: Indicates either that data is being processed, or that data is being
						written to the memory card.

						Flashing: Indicates when the printer needs maintenance attention
					Attention	or the printer is warming up (3OHDVH ZDLW). Read the message on
		ATTENTION				the message display and consult Chapter 5.
						the message display and consult Chapter 5.
					indicator	Lit: Indicates when a problem or an error occurs which may be cleared
					indicator
						by the user. (For example, the paper feed cassette is empty.) Read the
						message in the message display and consult Chapter 5.

2-4

Image 49

Kyocera 3750, FS1750 manual Symbolic Indicators, Indicator Name Description

Contents

FS-1750 FS-3750 Introduction License Limited WarrantyLimitation of Remedies Typeface Trademark Acknowledgement General Conforming to the Class a limits FCC statementConforming to the Class B limits Safety information Interface connectorsImportant note on the interface connectors Laser safety Cdrh regulations Ozone concentration CE Marking Directive Declaration of Conformity U.S.A Declaration of Conformity Australia Viii ISO Canadian Department of Communications compliance statementDisclaimer Prolonged Non-use Prolonged Non-Use and Moving the PrinterMoving the Printer Kyocera ECO-PRODUCT Action program Energy Print Engine Features Maintenance FeaturesIntroduction Options Software Features CD-ROM Kyocera Digital Library Guide to the ManualPrescribe 2e Programming Manual on CD-ROM Table of Contents Xvi Xvii Xviii Clearance Positioning the PrinterPlaces to Avoid Basic requirements Temperature 10C to 32.5C 50F to 90.5F Humidity 20% to 80%Voltage Frequency Unpacking and Inspection Power Supply List of Shipped Components Front View Names of Parts Rear View Interior View Setting Up and Interfacing Open the top cover Install the toner container Close the top cover Install the waste toner bottle Open the side cover on the left side of the printer Adjusting the paper guides in the cassette and adding paper Setting Up and Interfacing Open the paper stopper on the face-down output tray Install the face-up output tray if required Connect the printer to the computer Attach the power cordParallel interface Serial interface Print a status Set the emulation modeTest the interface with the computer Windows 95/Windows Install the printer driver CD-ROM Drive Name\drivers\Language\pcl\9x CD-ROM Drive Name\drivers\Language\kpdl\9x Windows Cassette Mode First Mode Automatic Manual FeedingMP Multi-Purpose Tray Feeding Duplex Printing from the MP tray 03 WUD\ Prgh Luvw First Mode Automatic Manual Feeding Feeding Envelopes Cassette Mode Handling a Memory Card Memory CardTo Remove the Memory Card Removing the Main Circuit Board Memory Expansion Installation Withdrawing the Main Circuit Board from the Printer Installing SIMMs Installing and Removing SIMMsSimm to be used Removing SIMMs Testing the Expansion Memory Control Panel Operating the Laser Printer Resolution Indicator Interface IndicatorMessage Display Message Meaning Copy Indicator Paper Size Indicator Indicator Name Description Symbolic Indicators Key Function Control Keys Switching Power On Operating ProceduresStack Selection Feed Selection Canceling Printing On-line/Off-line Setting Status Printout Sample Status Form Feed Mode Select Menu Using the Mode Select MenuFunction Default Setting 2SWïý 520ý ý ý ý ý ý ý Parallel Interface Configuring Interfaces RAM Disk Operations Setting the RAM Disk Size Hints on Writing Fonts to the Memory Card Operating a Memory CardReading Fonts/Data from a Memory Card Writing Data to a Memory Card Deleting Data from a Memory Card Printing a list of data names Formatting a Memory Card Keys to displayý!&DVVHWWHýVLHý Setting Custom Sizes Cassette, Media Type and Custom Settings Setting the Paper Type Paper Type User Setting Making Settings Submenus displayed Selection parameters Description Sleep Ecopower Mode Dumping Received Data Cancel key KIR 2 Level Optimized stripes Ecoprint ModeDark vertical stripes White vertical stripes Resource Protection Adjusting the Print Density Type of Error and Corresponding Audio Alarm Buzzer Setting the Audio Warning Buzzer Setting the Audio Warning Buzzer Internal Fonts Fonts Internal Scalable and Bitmap Fonts List of FontsFont Number Font samples List of Fonts Kpdl Fonts List of Fonts Toner kit replacement interval Toner Kit ReplacementToner Kit to be Used Supplying Toner To replace the toner container, proceed as follows Toner Kit Replacement Replace the Waste Toner Bottle Do not cap the new waste toner bottle Cleaning the Charger Wire CleaningMain Charger Unit Cleaning the Grid Paper Feed Unit If the printer does not print General GuideIf the printing is abnormal Interface Problems Power Problems Completely blank printout Print Quality ProblemsAll-black printout Check the developer unit Dropouts, horizontal streaks, stray dots Clean the charger wireBlack or white vertical streaks Check the control panel Grey background Faint or blurred printing Characters out of position Dirt on the top edge or back of the paperCheck the paper chute and the ramp Check the transfer roller Indicators Indicators and MessagesSymbolic Indicators Maintenance Messages Maintenance MessagesMessage Corrective Action DOO Vhuylfh Error Messages Error MessagesNing to ensure correct reading of the memory card 0025&$5 HUUúú Correcting a Paper Jam Printer Symbol Rear Cover Drum cleaning ResolutionFS-1750 FS-3750 Printing method Printing speed Power consumption Description FS-1750 FS-3750 Power requirementsSound pressure level at Front Dimensions Weight Table B.1 Specifications Paper SpecificationsSpecification General Guidelines Condition of the Paper Selecting the Right PaperComposition Paper Size Moisture Content Basis WeightSmoothness Thickness Caliper Paper type Media type Special Paper Table B.4 Adhesive Label Specifications Table B.3 OHP Film SpecificationsOverhead Projection OHP Film Adhesive-Backed Labels Colored Paper EnvelopesPreprinted Paper Recycled Paper Parallel interface communication modes Parallel Interface Table C.1. Parallel Connector Pin Assignments Interface SignalsPin In/out Description Paper Empty PError Pin Data 0 1 to Data 7 8 Pins 2 toReset nInit Pin Error* nFault Pin RS-232C/RS-422A Interface Interface SignalsRS-232C interface Removing the Main Circuit Board RS-422A interface Verifying the Setting Changing the Jumper Connector Serial Connector Overview of Signals RS-422ARS-422A interface voltage levels RDB Receive Data Pin RDA Receive Data Inverted Pin RS-232C/RS-422A Protocol RS-232C Cable Connection Prescribe 2e Frpo D0 commandPreparing an RS-232C Cable H7 Buffer nearly-empty threshold Ctrl P \DIR Connecting the Printer to the Computer Data On Line Index Index-2 Index-3 Basic Operations During Mode Selection Mode Select Menu From Previous VLH Hyhorshu