2.7.Setting Custom Sizes
2.7.Setting Custom Sizes
When setting sizes other than A5, A4, B5, Letter or Legal into the paper cassette, set the size of the paper to be used into the printer by the following procedure.
1.Displayý3DSHUýKDQGOLQJ!on the printer's display panel and press the
key. Then use the + and
– keys to displayý!&DVVHWWHýVL]Hý!.
2.By pressing the
keyý!!8QLWappears as shown in the diagram below (The unit of the paper length). You can selectýPP orýLQFK by using the + and – keys.
!!8QLW
ýý PP !!8QLW ý ý LQFK
3.With the unit settings completed,ý!!;ýGLPHQVLRQ appears as shown in the diagram below (the paper width setting). Press the ENTER key while in this state and the cursor begins to flash.
☛The width that can be set must be in the range of
!!;ý GLPHQVLRQ ëìçýB PP
4.By pressing the + and – keys the numbers above the cursor change. By pressing the
or
keys the position of the cursor moves.
5.When you have input the desired custom size, press the ENTER key to complete the width setting.
6.With the width settings completed, press the + and – keys andý!!<ýGLPHQVLRQ appears as shown below (the paper length setting). Set this in the same way as the width setting.
☛The length that can be set must be in the range of
!!<ý GLPHQVLRQ êèçýB PP