4.2. Cleaning

Cleaning the Grid

1.Take the grid cleaner from protective bag in the new

toner kit, and remove the cap.

Protective Bag

Cap

☛ The grid cleaner pad is impregnated with water.

 

 

Perform the following cleaning procedure before the pad dries.

Grid Cleaner

2.Attach thegrid cleaner to theprinter with the pad uppermost, as shown in the diagram.

3.After attachingthe gridcleaner, repeat the action of slowly pulling out and then pushing back in the main charger unit at least 5 times. It is easier to pull out the main charger for the first time if it is raised slightly, as shown in the figure.

The grid part underneath the main charger is

(3)

cleaned by this procedure.

 

Grid Cleaner

(1)

(2)

Main Charger Unit

4.When the grid is clean, remove the grid cleaner from the printer and dispose of it. The grid cleaner is not re-usable.

5.After cleaning the charger wire, push the clean- ing knob all the way in and close the side cover.

4-7