IBM 441 Installing, removing, or replacing hardware, Installing or removing a memory module

4.To reinstall the front bezel, align the other three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis, then pivot the front bezel inward until it snaps into position on the left side.

Figure 35. Installing the front bezel

5. Go to “Completing the parts replacement” on page 162.

Installing, removing, or replacing hardware

This topic provides instructions on how to install, remove, or replace hardware for your server. You can expand the capabilities of your server by adding new hardware devices, such as memory modules, PCI cards, or other server options, and maintain your server by replacing the failing hardware devices.

If you are handling a server option, refer to the appropriate installation and or removal instructions in this topic along with the instructions that come with the option.

Notes:

1.Use only parts provided by Lenovo.

2.Depending on the model, your server might look slightly different from the illustrations in this topic.

Installing or removing a memory module

This topic provides instructions on how to install or remove a memory module.

For a list of the ThinkServer memory module options, go to http://www.lenovo.com/thinkserver. Click the Products tab and then click Options ➙ ThinkServer Memory to view the information.

Note: The memory modules are extremely sensitive to ESD. Make sure that you read and understand “Handling static-sensitive devices” on page 84 first and carefully perform the operation.

Chapter 6. Installing, removing, or replacing hardware 89