IBM 393, 387, 391, 389, 388, 441, 390, 392 manual Server Management menu

Security menu items

Menu item		Selections	Comments
Set Administrator Password			Set an administrator password
			to protect against unauthorized
			access to your server. See “Using
			passwords” on page 65.
Set User Password			Set a user password to protect
			against unauthorized access to your
			server. See “Using passwords” on
			page 65. This item is only available
			after you have set an administrator
			password.
Power/Reset Button Lockout	•	Disabled	If this item is set to Enabled, the
	•	Enabled	power switch on the front panel will
			be locked and the server can only be
			turned on remotely.
BIOS Write Protect	•	Disabled	If you want to update or flash the
	•	Enabled	BIOS, make sure that this item is
			set to Disabled. If this item is set to
			Enabled, the BIOS will be protected
			from updating or flashing.
TPM Support	•	Disabled	Enable or disable the TPM support.
	•	Enabled	To use the TPM feature, you need to
			have a TPM module installed in the
			TPM connector on the system board.
TPM State	•	Disabled	This item is displayed when the TPM
	•	Enabled	Support is set to Enabled. Set the
			TPM State to enable or disable the
			TPM function. The server will restart
			in order to change the state of TPM.

Server Management menu

This topic provides information about the features available on the Server Management menu in the Setup Utility program.

You can view system information and view or change event log settings on the Server Management menu. The following table shows the contents of the Server Management menu. On each submenu, press the Enter key to view the information or show selectable options and select a desired option by using up and down arrow keys. Some items are displayed on the menu only if the server supports the corresponding features.

Note: Default values are in boldface in the Selections column.

Chapter 5. Configuring the server 61