IBM 391, 387, 393, 389, 388, 441, 390, 392 Removing a PCI card slot bracket, ThinkServer User Guide

1.Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server.

2.Remove the server cover. See “Removing the server cover” on page 85.

3.Lay the server on its side for easier operation.

4.Locate an appropriate PCI card slot on the system board. See “System board components” on page 42 to identify the different types of PCI card slots in your server.

5.Remove the PCI card slot bracket by removing the screw that secures the metal bracket and then lifting the bracket out of the chassis. Store the PCI card slot bracket in the event that you later remove the PCI card and need the bracket to cover the place.

Note: Carefully place the removed screw aside. You will need the screw later to secure the PCI card in place.

Figure 40. Removing a PCI card slot bracket

6.Touch the static-protective package that contains the new PCI card to any unpainted surface on the outside of the server. Then, take the new PCI card out of the package.

Note: Carefully handle the PCI card by its edges.

94ThinkServer User Guide