IBM 387, 393, 391, 389, 388, 441, 390, 392 manual Security menu, ThinkServer User Guide

Menu item	Submenu item		Selections	Comments
	Onboard LAN2 I/O ROM	•	Disabled	Enable or disable the
		•	Enabled	onboard LAN2 I/O ROM.
	PCI ROM Priority	•	Legacy ROM	Choose a mode for the
		•	EFI Compatible ROM	PCI ROM priority. In case
				of multiple Option ROMs
				(Legacy ROM and EFI
				Compatible ROM), the
				selection specifies which
				PCI Option ROM to launch.
USB Configuration	USB Controller	•	Disabled	Enable or disable the USB
(set USB configuration		•	Enabled	controller.
parameters)
	Legacy USB Support	•	Enabled	Enable or disable the
		•	Disabled	support on legacy USB
				devices.
		•	Auto
	Port 60/64 Emulation	•	Disabled	Enable or disable the
		•	Enabled	port 60h/64h emulation.
				This function is for the
				operating system that does
				not support legacy USB
				devices.
	TANDBERGRDX 3040	•	Auto	Mass storage device
		•	Floppy	emulation type. Auto
				means to enumerate
		•	Forced FDD
				devices according to their
		•	Hard Disk	media format. Optical
		•	CD-ROM	devices are emulated as
				“CD-ROM”; drives with
				no media are emulated
				according to the drive type.
Console Redirection	Console Redirection	•	Disabled	The setting specifies how
Configuration (set console		•	Serial Port 1	the host computer and the
redirection configuration				remote computer (which the
		•	Serial Port 2
parameters)				user is using) will exchange
				data. Both computers
				should have the same or
				compatible settings.

Security menu

This topic provides information about the security related settings on the Security menu in the Setup Utility program.

You can set passwords, the TPM feature, and other security features on the Security menu. The following table shows the contents of the Security menu. For each menu item, press the Enter key to show selectable options and select a desired option by using up and down arrow keys or type desired values from the keyboard directly. Some items are displayed on the menu only if the server supports the corresponding features.

Notes:

•Enabled means that the function is configured.

•Disabled means that the function is not configured.

•Default values are in boldface in the Selections column.

60ThinkServer User Guide