IBM 392, 387, 393, 391, 389, 388, 441, 390 manual Menu item

Menu item	Submenu item		Selections	Comments
		•	Power on	If the power is interrupted
				when the server is on, after
				the power resumes:
				• If you have selected Stay
				off, the server will stay in
				the off state.
				• If you have selected Last
				State, the server will
				resume to the last state.
				• If you have selected
				Power on, the server will
				restart automatically.
SATA Configuration	SATA Mode	•	IDE Mode	Select SATA controller
(set SATA configuration		•	AHCI Mode	operation mode. If you
parameters)				want to configure RAID,
		•	RAID Mode
				choose RAID Mode for the
				SATA controller.
	SATA Port0			View the information about
				the SATA device connected
				to the SATA connector 0 on
				the system board.
	SATA Port1			View the information about
				the SATA device connected
				to the SATA connector 1 on
				the system board.
	SATA Port2			View the information about
				the SATA device connected
				to the SATA connector 2 on
				the system board.
	SATA Port3			View the information about
				the SATA device connected
				to the SATA connector 3 on
				the system board.
	SATA Port4			View the information about
				the SATA device connected
				to the SATA connector 4 on
				the system board.
	SATA Port5			View the information about
				the SATA device connected
				to the SATA connector 5 on
				the system board.
PCI Configuration (set PCI	Onboard Graphics	•	Disabled	Enable or disable
configuration parameters)	Controller	•	Enabled	the onboard graphics
				controller.
	Primary Graphics	•	Onboard	Choose a mode for primary
		•	Add-On	graphics. The Add-On
				option requires a graphics
				card installed.
	Onboard LAN1 I/O ROM	•	Disabled	Enable or disable the
		•	Enabled	onboard LAN1 I/O ROM.

Chapter 5. Configuring the server 59