IBM 441, 387, 393, 391, 389, 388, 390, 392 manual Opening the front door of the server

• For hard disk drives with different capacities, install the hard disk drive with the lowest capacity first.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another computer for reference.

Notes:

•Depending on the model, your server might look slightly different from the illustrations in this topic.

•Use any documentation that comes with the hard disk drive and follow those instructions in addition to the instructions in this topic.

To install a non-hot-swap hard disk drive, do the following:

1.Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server.

2.Use the front door key to unlock the front door and then use the front door handle front door to the open position.

1

to pivot the

Figure 66. Opening the front door of the server

Chapter 6. Installing, removing, or replacing hardware 129