Manuals / IBM / Computer Equipment / Laptop

IBM 389, 387, 393, 391, 388, 441, 390, 392 manual

Models: 392 390 441 388 389 391 393 387

1 210

Download 210 pages 3.89 Kb

Page 51

Use the following instructions to connect the cables:

1.Use one 700 mm (27.56 inches) mini-SAS to mini-SAS signal cable. Connect the mini-SAS connector

1to the port 0 on the RAID card. Then, connect the mini-SAS connector 2 to the mini-SAS signal cable connector on the 3.5-inch hot-swap hard disk drive backplane installed on the lower hard disk drive cage.

2.Use the other 700 mm (27.56 inches) mini-SAS to mini-SAS signal cable. Connect the mini-SAS connector 5 to the port 1 on the RAID card. Then, connect the mini-SAS connector 6 to the mini-SAS signal cable connector on the 3.5-inch hot-swap hard disk drive backplane installed on the upper hard disk drive cage.

3.Use the 2-pin 200 mm (7.87 inches) RAID card to system board hard disk drive LED cable. Connect the end 4 to the external connector on the RAID card and the end 3 to the hard disk drive LED connector on the system board.

Figure 23. Connecting cables for server models with two backplanes and a RAID card

For connector location information about the RAID card, hot-swap hard disk drive backplane, and the system board, refer to the related topics in “Locations” on page 13.

For information about connecting the appropriate power connector of the power supply to the backplane, see “Hot-swap hard disk drive backplane” on page 34.

Server models with up to eight 2.5-inch SAS hot-swap hard disk drives and one backplane

For server models with up to eight 2.5-inch SAS hot-swap hard disk drives and one backplane, a required RAID card must be installed in the server.

The following cables that come with the RAID card are required:

Note: The option package for the RAID card is designed for different types of servers and might contain additional cables that are not required to be installed into your server.

•One or two 700 mm (27.56 inches) mini-SAS to mini-SAS signal cables depending on the number of the hard disk drives installed

•One 2-pin 200 mm (7.87 inches) RAID card to system board hard disk drive LED cable

Chapter 3. Product overview 39

Image 51

Lenovo 389, 387, 393, 391, 388, 441, 390, 392 manual

Contents

Machine Types 0387, 0388, 0389, 0390, 0391, 0392, 0393, and ThinkServer User GuideThe Read Me First that comes with your product Contents Appendix A. Notices Chapter 7. Troubleshooting and diagnosticsChapter 8. Getting information, help and service Reinstalling the server cover and reconnecting제품을 사용하기 전에 제품과 함께 제공되는 문서 DVD의 다국어 안전 지침을 주의 깊게 읽어보십시오 Safety information在使用本产品之前，请务必先阅读和了解产品附带的文档 DVD 中的多语言安全说明。使用本產品之前，請務必閱讀並瞭解產品隨附的文件 DVD 上的多國語言版本安全資訊。iv ThinkServer User Guide Statement DANGER Danger of explosion if battery is incorrectly replacedDispose of the battery as required by local ordinances or regulations Statement DANGERStatement Use safe practices when lifting StatementStatement DANGERStatement StatementStatement StatementStatement StatementThe following label indicates a hot surface nearby Statement DANGER StatementStatement Torque the wiring-terminal screws to 12 inch-pounds 1.4 newton-metersStatement To reduce the risk of electric shock or energy hazardsx ThinkServer User Guide StatementIntroduction Chapter 1. General informationImportant Notices Server documentationPrinted documents Read Me FirstHardware Maintenance Manual Safety InformationWarranty and Support Information Document for trained service personnel only4 ThinkServer User Guide Chapter 2. Server setup road map 6 ThinkServer User Guide Features Chapter 3. Product overviewServer package Fans Power supplyMicroprocessor MemoryVideo subsystem Input/Output I/O featuresInternal drives Expansion slotsReliability, availability, and serviceability Security featuresBasic system management features Advanced system management features Specifications SoftwareThinkServer EasyStartup PC-Doctor for DOS ThinkServer EasyUpdate Firmware UpdaterBIOS and BMC firmware update utility RAID configuration utilities14 ThinkServer User Guide Figure 2. Machine type, model, and serial number labelsFront view of the server Front panelOptical drive bay Front door Optical drive bay4 Optical drive eject/close button 5 Optical drive status LEDPower switch with power status LED Front panelHard disk drive status LED DIT moduleFront USB connector Front USB connectorRear view of the server Error LEDs4 Ambient temperature over limit LED VGA DB-15 connector Figure 6. Rear view of the server with a non-hot-swap power supplyPower cord connector Ethernet connector 1 RJ-45Serial port Power cord connectorsVGA DB-15 connector USB connectorsServer locks Ethernet connectorsFront door key Figure 8. Padlock PadlockFigure 9. Integrated cable lock Integrated cable lockServer components Front door lockFigure 10. Front door lock For more information about disk drive bay Page Page 30 ThinkServer User Guide Page Figure 15. 3.5-inch hot-swap hard disk drive status LEDs Hot-swap hard disk drive status LEDsFigure 16. 2.5-inch hot-swap hard disk drive status LEDs RAID cardPort Hot-swap hard disk drive backplaneRAID 5 key connector External connectorBackplane for 3.5-inch hot-swap hard disk drives 8-pin power connector Mini-SAS signal cable connector36 ThinkServer User Guide 8-pin power connector Backplane for 2.5-inch hot-swap hard disk drives38 ThinkServer User Guide Connecting cablesMini-SAS signal cable connector Mini-SAS signal cable connectorPage 40 ThinkServer User Guide System board SATA connector SATA signal cable label42 ThinkServer User Guide System board componentsFigure 27. System board components 5-pin system fan 2 connector PMBus connectorTPM connector Main power connectorInternal dual-port USB 2.0 connector iKVM key connectorInternal USB 2.0 Type A connector Internal dual-port USB 2.0 connectorMicroprocessor power connector System board jumpersMicroprocessor fan connector System fan 3 connectorFigure 28. Default jumper setting Clear CMOS /Recovery jumper Manufacturing jumper BMC setting jumperBIOS recovery jumper Clear password jumperSystem board hardware fault LED System board LEDsBMC status LED POST code diagnostic LEDs52 ThinkServer User Guide Chapter 4. Turning on and turning off the server Turning on the serverTurning off the server 54 ThinkServer User Guide Viewing information in the Setup Utility program Chapter 5. Configuring the serverUsing the Setup Utility program Starting the Setup Utility programMain menu Setup Utility program interfaceAdvanced menu 58 ThinkServer User Guide Menu item 60 ThinkServer User Guide Security menuServer Management menu 1. UEFI Device 2. Hard Disk Drive 3. Optical Disk Drive Boot Options menuBoot Options menu items Server Management menu itemsMenu item 2. On the Main menu, select System Date or System Time Setting the system date and timeBoot Manager menu Exit menuSetting, changing, or deleting a password Using passwordsSetup Utility program password type Password considerationsConfiguring the TPM function Selecting a startup device66 ThinkServer User Guide Exiting the Setup Utility program Updating or recovering the BIOSDownloading the BIOS update utility program Updating flashing the BIOS Recovering from a BIOS update failure2. Click Download & Drivers ThinkServer 2. Click Download & Drivers ThinkServer Using the ThinkServer EasyStartup programStarting the ThinkServer EasyStartup program Features of the ThinkServer EasyStartup programHome Configuring RAIDConfigure RAID Install operating systemAbout RAID RAID for your server 74 ThinkServer User Guide Configuring RAID using the ThinkServer EasyStartup program2. On the Advanced menu, select SATA Configuration SATA Mode Configuring the onboard SATA software RAIDStarting the LSI Software RAID Configuration Utility program LSI Software RAID Configuration Utility program interfaceRebuild ConfigureInitialize ObjectsCreating, adding, or deleting a RAID array Initializing a virtual driveChapter 5. Configuring the server Setting a hot-spare drive Rebuilding a physical drive78 ThinkServer User Guide Chapter 5. Configuring the server Running a consistency checkInstalling and using the MegaRAID Storage Manager program Configuring the advanced SATA or SAS hardware RAID2. Click Download & Drivers ThinkServer Configuring the Ethernet controllersUsing the Firmware Updater program Updating the firmware82 ThinkServer User Guide Chapter 6. Installing, removing, or replacing hardware PrecautionsGuidelines System reliability guidelines Handling static-sensitive devicesWorking inside the server with the power on Removing the server coverChapter 6. Installing, removing, or replacing hardware 86 ThinkServer User Guide Figure 32. Sliding the server cover to the rearFigure 33. Removing the server cover Removing and reinstalling the front bezel88 ThinkServer User Guide Figure 34. Removing the front bezelInstalling or removing a memory module Installing, removing, or replacing hardwareDIMMA2 Memory module installation rulesUDIMM DIMMA1Figure 37. Opening the retaining clips of the memory slots Installing a memory moduleWhat to do next Removing a memory moduleInstalling or removing a PCI card Installing a PCI cardWhat to do next 94 ThinkServer User Guide Figure 40. Removing a PCI card slot bracketRemoving a PCI card Figure 41. Installing a PCI cardWhat to do next Installing or removing the Ethernet card Installing the Ethernet cardWhat to do next Removing the Ethernet card What to do next4. Expand the Network adapters Installing or removing the RAID card Installing the RAID cardWhat to do next What to do next Removing the RAID cardInstalling or removing the ThinkServer 9240-8i RAID 5 Upgrade Key Installing the RAID 5 key on the RAID cardWhat to do next Removing the RAID 5 key from the RAID card Figure 43. Installing the RAID 5 key on the RAID cardWhat to do next Installing or removing the ThinkServer SATA Software RAID 5 Key Installing the system board RAID 5 keyWhat to do next What to do next Figure 45. Installing the system board RAID 5 key104 ThinkServer User Guide Removing the system board RAID 5 keyInstalling or removing the ThinkServer iKVM Remote Management Module What to do nextFigure 46. Removing the system board RAID 5 key 106 ThinkServer User Guide Installing the iKVM keyRemoving the iKVM key Figure 47. Installing the iKVM keyWhat to do next What to do next Figure 48. Removing the iKVM key108 ThinkServer User Guide Installing the TPM module Installing or removing the TPM moduleRemoving the TPM module Figure 49. Installing the TPM moduleWhat to do next Installing or removing the DIT module What to do nextFigure 50. Removing the TPM module Figure 51. Installing the DIT module Installing the DIT moduleRemoving the DIT module What to do nextFigure 52. Cable routing What to do next Figure 53. Removing the DIT module114 ThinkServer User Guide DANGER Installing or replacing an optical drivePower connector Connector on the system board116 ThinkServer User Guide Figure 54. Removing the EMI shield for the upper optical drive bayFigure 55. Removing the optical drive 7. Connect the appropriate power cable What to do next Installing or replacing a hot-swap hard disk driveTo install or replace a hot-swap hard disk drive, do the following to open the handle of the hot-swap hard disk drive or the dummy tray 3. Press the release buttonNote Do not touch the circuit board on the hard disk drive Removing or installing a non-hot-swap hard disk drive Figure 61. Installing the hot-swap hard disk driveWhat to do next 124 ThinkServer User Guide Removing a non-hot-swap hard disk driveFigure 62. Opening the front door of the server to pivot the4. Remove the server cover. See “Removing the server cover” on page Figure 64. Sliding the non-hot-swap hard disk drive out of the bay Installing a non-hot-swap hard disk drive Figure 65. Installing the EMI-protective panelWhat to do next Figure 66. Opening the front door of the server 130 ThinkServer User Guide Figure 67. Removing the EMI-protective panelNote Do not touch the circuit board 10. Connect the appropriate power cable hard disk drive Replacing the hot-swap hard disk drive backplane Figure 70. Installing the EMI-protective panelWhat to do next 134 ThinkServer User Guide Figure 71. Removing the hard disk drive cageNote Carefully handle the backplane by its edges 14. Refer to your note and reconnect the cables to the backplane Replacing the non-hot-swap power supply assembly What to do nextHazardous moving parts. Keep fingers and other body parts away 138 ThinkServer User Guide Figure 77. Releasing the non-hot-swap power supply assemblyFigure 78. Removing the non-hot-swap power supply assembly Replacing a hot-swap redundant power supply module Figure 79. Installing the non-hot-swap power supply assemblyWhat to do next Hazardous moving parts. Keep fingers and other body parts away 142 ThinkServer User Guide Figure 80. Removing a hot-swap redundant power supply moduleReplacing the power distribution board and cage assembly Figure 81. Installing a hot-swap redundant power supply moduleHazardous moving parts. Keep fingers and other body parts away 144 ThinkServer User Guide Figure 82. Removing the power distribution board and cage assembly Figure 83. Installing the power distribution board and cage assembly What to do next146 ThinkServer User Guide Replacing the front panel board assembly 148 ThinkServer User Guide Figure 84. Removing the front panel board assemblyReplacing the front system fan Figure 85. Installing the front panel board assemblyWhat to do next 150 ThinkServer User Guide Hazardous moving parts. Keep fingers and other body parts awayFigure 86. Removing the front system fan Figure 87. Installing the front system fan152 ThinkServer User Guide Replacing the rear system fanWhat to do next Hazardous moving parts. Keep fingers and other body parts awayFigure 88. Removing the rear system fan Replacing the heat sink and fan assembly Figure 89. Installing the rear system fanWhat to do next Hazardous moving parts. Keep fingers and other body parts away a. Partially remove screw completely remove it What to do next Replacing the microprocessor158 ThinkServer User Guide Figure 92. Lifting the handle to open the microprocessor retainerFigure 93. Removing the microprocessor Figure 94. Do not touch the pins160 ThinkServer User Guide Figure 95. Installing the microprocessorWhat to do next Figure 96. Securing the microprocessor in the socketDo not Throw or immerse into water Heat to more than 100C 212F Replacing the system board batteryDANGER Danger of explosion if battery is incorrectly replaced Dispose of the battery as required by local ordinances or regulationsFigure 98. Installing the system board battery Completing the parts replacementReinstalling the server cover and reconnecting cables Figure 97. Removing the system board batteryFigure 99. Closing the server cover Chapter 6. Installing, removing, or replacing hardwareUpdating the server configuration Chapter 6. Installing, removing, or replacing hardware To update your system firmware, see “Updating the firmware” on page166 ThinkServer User Guide Chapter 7. Troubleshooting and diagnostics Troubleshooting procedureViewing the status and diagnostic LEDs Viewing the system event log Using the diagnostic programBasic troubleshooting tables ThinkServer EasyStartup program problemsThe ThinkServer EasyStartup DVD does not start Optical drive problems170 ThinkServer User Guide Hard disk drive problemsAction SymptomMemory module problems Keyboard, mouse, or USB device problems172 ThinkServer User Guide Action Symptom174 ThinkServer User Guide Lenovo Support Web site Chapter 8. Getting information, help, and serviceUsing the documentation Information resourcesWarranty Help and serviceCalling for service Before you callPurchasing additional services Using other services178 ThinkServer User Guide Appendix A. Notices Lenovo United States, Inc 1009 Think Place - Building OneMorrisville, NC U.S.A Attention Lenovo Director of Licensing Recycling information TrademarksImportant notes Polyvinyl Chloride PVC cable and cord noticeBattery return program Requirement for batteries containing perchlorate Particulate contaminationFor the European Union Important information for the European Directive 2002/96/EC ContaminantLimits 184 ThinkServer User Guide Appendix A. Notices 186 ThinkServer User Guide Restriction of Hazardous Substances Directive RoHSChina RoHS Turkish statement of compliance United Kingdom telecommunications safety requirement German Ordinance for Work gloss statementElectronic emission notices Federal Communications Commission FCC StatementDeutschland German Class A compliance statement Deutschsprachiger EU HinweisJapan VCCI Class A compliance statement Lenovo product service information for TaiwanAustralia and New Zealand Class A statement Korea Class A compliance statementIndex server cover Page ThinkServer Web address startup deviceWeb site compatible options video subsystem features viewing informationSetup Utility program 55 virtual drive initializing working inside the server with the power on guidelines196 ThinkServer User Guide