IBM 388, 387, 393, 391, 389 To install or replace a hot-swap hard disk drive, do the following

3.Use any documentation that comes with the hot-swap hard disk drive and follow those instructions in addition to the instructions in this topic.

To install or replace a hot-swap hard disk drive, do the following:

1.Use the front door key to unlock the front door and then use the front door handle front door to the open position.

1

to pivot the

Figure 58. Opening the front door of the server

2. Locate the appropriate hard disk drive bay. See “Server components” on page 25.

120ThinkServer User Guide