IBM 388, 387, 393, 391, 389, 441, 390, 392 manual Setup Utility program interface, Main menu

•On the Server Management menu, select System Information to view the information about your system, including the BMC information.

Setup Utility program interface

This topic provides information about the menus and items in the Setup Utility program.

Depending on the version of your system BIOS, some menu or item information might differ slightly from the information in this topic. The information in this topic is based on the 0.9b version of the BIOS.

Notes:

1.The default settings are already optimized for you. Use the default value for any item you are not familiar with. Do not change the value of unfamiliar items or items that are not mentioned in this topic to avoid unexpected problems. If you consider changing the server configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results. If you cannot turn on the server because of incorrect BIOS settings, use the Clear CMOS /Recovery jumper to recover the BIOS to the factory default settings or use the BIOS recovery jumper to boot the server from a BIOS recovery image and recover the BIOS to the version in the image. See “System board jumpers” on page 46.

2.Lenovo provides the BIOS update utility on the Lenovo Support Web site. You can download the BIOS image and follow the instructions on the Web site to update the BIOS. See “Updating or recovering the BIOS” on page 67. After updating the BIOS, all the BIOS settings become the default settings of the updated BIOS version. You need to check and reconfigure the BIOS settings for your specific needs.

3.If you have changed any hardware in the server, you might need to reflash the BIOS, the BMC firmware, and the FRU/SDR.

The following menus are listed on the BIOS Setup Utility screen:

•Main: See “Main menu” on page 56.

•Advanced: See “Advanced menu” on page 57.

•Security: See “Security menu” on page 60.

•Server Management: See “Server Management menu” on page 61.

•Boot Options: See “Boot Options menu” on page 62.

•Boot Manager: See “Boot Manager menu” on page 64.

•Exit: “Exit menu” on page 64.

Main menu

After entering the Setup Utility program, you can see the Main menu, which lists some basic information about the system BIOS version and build date, the microprocessor, memory, and the system date and time.

56ThinkServer User Guide