System Information: View basic information about your server.

BMC Network Configuration: Set BMC configuration parameters.

Boot Options menu

The Boot Options menu in the Setup Utility program provides an interface to help you view or change the server startup options, including the startup sequence and boot priority for various devices. Changes in the startup options take effect when the server starts.

The startup sequence specifies the order in which the server checks devices to find a boot record. The server starts from the first boot record that it finds. For example, you can define a startup sequence that checks a disc in the optical drive, then checks the hard disk drive, and then checks a network device. For information about setting the startup sequence or selecting a startup device, see “Selecting a startup device” on page 64.

Boot Manager menu

The Boot Manager menu in the Setup Utility program lists all the bootable devices installed in your server and the listed items vary depending on your server configuration. If you select a desired device listed on this menu, the server will start from the device you select.

You can press F12 when turning on the server and select a temporary startup device from the boot device selection window. See “Selecting a startup device” on page 64.

Save & Exit menu

After you finish viewing or changing settings in the Setup Utility program, you can choose a desired action from the Save & Exit menu to save changes, discard changes, or load default values, and exit the program. Press Enter to select the item on the Save & Exit menu and then select Yes when prompted to confirm the action. For information about exiting the Setup Utility program, see “Exiting the Setup Utility program” on page 65.

The Save & Exit menu contains the following items:

Save Changes and Exit: Save changes and exit the Setup Utility program.

Save Changes and Reset: Save changes and then continue with the configuration in the Setup Utility program.

Discard Changes and Exit: Discard changes, load previous values, and then exit the Setup Utility program.

Discard Changes: Discard changes and load previous values.

Restore Defaults: Return to the optimized default settings.

Save as User Defaults: Save the current settings as user default values.

Restore User Defaults: Restore the user default values for all the items.

Setting the system date and time

This topic provides instructions on how to set the system date and time in the Setup Utility program.

To set the system date and time in the Setup Utility program, do the following:

1.Start the Setup Utility program. See “Starting the Setup Utility program” on page 59.

2.On the Main menu, select System Date or System Time.

3.Use the Tab key to switch between data elements and type the numbers from the keyboard to set the system date and time.

4.Press F10 to save settings and exit the Setup Utility program.

62ThinkServer RD430 User Guide

Page 74
Image 74
Lenovo RD430 manual Setting the system date and time, Boot Options menu, Boot Manager menu, Save & Exit menu