Lenovo RD430 manual Copyright Lenovo

Statement 16

CAUTION:

To reduce the risk of electric shock or energy hazards:

•This equipment must be installed by trained service personnel in a restricted-access location, as defined by your local electrical code and the latest edition of IEC 60950.

•Connect the equipment to a reliably earthed safety extra low voltage (SELV) source. An SELV source is a secondary circuit that is designed so that normal and single fault conditions do not cause the voltages to exceed a safe level (60 V direct current).

•The branch circuit overcurrent protection must be rated in accordance with local electrical code requirements.

•Use 1.3 mm2 or 16 American Wire Gauge (AWG) copper conductor only, not exceeding 3 meters in length.

•Torque the wiring-terminal screws to 1.4 newton-meters or 12 inch-pounds.

•Provide a readily available, approved and rated disconnect device in the field wiring.

Statement 17

CAUTION:

This product contains a Class 1M laser. Do not view directly with optical instruments.

Statement 18

CAUTION:

Do not place any object on top of rack-mounted products.

Statement 19

CAUTION:

Hazardous moving parts. Keep fingers and other body parts away.

© Copyright Lenovo 2012 ix