Step 8: Set default copy settings
Many of these settings depend on the type of printer and scanner you have.
There are two ways to set the copy default settings for the OptraImage.
Method 1: Use the OptraImage resident web page.
1Type the IP address of the OptraImage in the URL field of your browser (for example, http://192.168.236.24), and then press Enter.
2Click Configuration.
3Select Copy Setup from the OptraImage menu.
The Copy Setup page has the following settings available:
•Content
•Copy Media
•Paper Saver
•
•Duplex
•Finishing
•Original Size
•Copy Size
•Scaling
•Default Darkness
•Output bin
•Number of Copies
•Factory Defaults
4After you select your settings, click Submit.
OptraImage Setup Guide | 15 |