Step 2: Install the MarkNet print server
CAUTION! Before installing the MarkNet N2501e print server in your printer, make sure the fax/phone cable is not plugged into the card or the wall outlet. Make sure your printer is unplugged.
See “Safety information” on page 4 for additional caution information.
If your printer shipped with the MarkNet N2501e or N2401e print server already installed, skip to the next step.
Install the MarkNet N2501e or N2401e print server in an available optional card slot inside your printer. (MarkNet internal print servers are sometimes called printer option cards.)
For detailed instructions about installing your print server, refer to your printer setup documentation.
MarkNet N2501e print server ports
SCSI port (OptraImage scan | Ethernet 10/100 | Fax Modem |
unit attaches here) | port (uses | port (uses RJ- |
| cable) | 11 cable) |
MarkNet 2401e print server ports
SCSI port (OptraImage scan | Ethernet 10/100 |
unit attaches here) | port (uses |
| cable) |
6 | OptraImage Setup Guide |