
Maintain your scanner
Clearing a paper jam in the ADF
Cleaning the ADF
Upper feeding roller
1Turn off and disconnect the power to the scan unit.
2Open the Automatic Document Feeder (ADF) to its full position.
3Carefully pull out the jammed piece of paper.
4Close the ADF.
5Connect the power and turn the scan unit back on.
Clean the scan unit if documents do not feed smoothly or easily, or if several documents feed at one time. The scan unit parts may be contaminated with ink, toner particles or paper coatings.
1Wet a clean,
2Open the ADF unit and wipe the upper feeding roller by moving the swab from side to side.
3Rotate the roller forward with your finger and repeat the above cleaning procedures until the entire roller is cleaned.
4Wipe the pad from top to bottom. Be careful not to hook the pick springs.
5Close the ADF unit. Your scan unit is now ready for use.
OptraImage Setup Guide | 27 |