Saving settings
In a setting menu, an * appears next to the default setting. To change the setting:
1Press or repeatedly until the setting you want appears.
2Press :
To save most settings. An * appears next to the saved setting.
To select a temporary setting. An * appears next to the selected setting.
Note: The printer reverts to the default setting of a temporary setting after two minutes of inactivity or if the
printer is turned off.
Temporary settings
Copy Mode Copies
Resize
Lighter/Darker
Quality
Repeat Image
N-Up
Original Size
Original Type
Scan Mode Quality
Original Size
Resize
Photo Card The following Photo Card settings will not time out after two minutes of
inactivity or turning off the power but will return to the factory default settings
when a memory card or flash drive is removed.
Photo Effects
Photo Size
Layout
Quality
To change the timeout feature:
aPress Settings.
bPress or repeatedly until Device Setup appears.
cPress .
dPress or repeatedly until Clear Settings Timeout appears.
ePress .
fPress or repeatedly until Never appears.
gPress .
3To change one or more temporary settings into new default settings:
aPress Settings.
bPress or repeatedly until Defaults appears.
25