Lexmark 6600 Series, 5600 Series manual Can receive but not send faxes, 147

3Press the arrow buttons until Ringing and Answering appears, and then press .

4Press the arrow buttons until Fax Forward appears, and then press . Check to see if Fax Forward is set to Forward or Print & Forward.

5If fax forward is set to on, press the arrow buttons until Off appears, and then press .

Can receive but not send faxes

These are possible solutions. Try one or more of the following:

CHECK MODE SELECTION

To make sure that the printer is set for faxing, check to see if the light is on.

If the light is not on, press on the printer control panel.

CHECK DOCUMENT PLACEMENT

Load the original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.

CHECK THE DIAL PREFIX SETTING

1From the printer control panel, press .

2Press the arrow buttons until Fax Setup appears, and then press .

3Press the arrow buttons until Dialing and Sending appears, and then press .

4Press the arrow buttons until Dial Prefix appears, and then press .

5To change the setting, press the arrow buttons until the prefix that you want appears, and then press .

6If you have not yet created a setting for the dialing prefix:

aPress the arrow buttons until Create appears, and then press .

bUsing the keypad, enter the prefix to be dialed before each telephone number, and then press to save the setting.

CHECK SPEED DIAL NUMBER

•Check to make sure Speed Dial has been programmed for the number that you want to dial. For more information, see the instructions for setting up Speed Dial.

•As an alternative, dial the telephone number manually.

MAKE SURE THE PRINTER DETECTS DIAL TONE

•See the instructions for sending a fax while listening to a call (on hook dial).

•Check the Dial Method setting:

1 Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not recognize the dial tone.

2From the printer control panel, press .

3Press the arrow buttons until Fax Setup appears, and then press .

Troubleshooting

147