Lexmark 5600 Series, 6600 Series Remote Fax Error, Phone Line Busy, 150, Check the Phone Line

4Press the arrow buttons until Auto Fax Convert appears, and then press .

5If auto fax conversion is not set to on, press the arrow buttons until On appears, and then press .

Remote Fax Error

These are possible solutions. Try one or more of the following:

CHECK THE PHONE LINE

Resend the fax. There may have been a problem with the quality of the telephone line connection.

DECREASE THE TRANSMISSION SPEED

1From the printer control panel, press .

2Press the arrow buttons until Fax Setup appears, and then press .

3Press the arrow buttons until Dialing and Sending appears, and then press .

4Press the arrow buttons until Max Send Speed appears, and then press .

5Press the arrow buttons to select a lower transmission speed, and then press .

6Resend the fax.

7If the problem persists, repeat step 1 through step 5 to resend the fax at successively lower transmission speeds.

Note: 2400 bps is the lowest transmission speed.

Notes:

•The lower the transmission speed, the longer it will take your fax to print.

•This solution will reduce the speed for future faxes until you reset the transmission speed.

Phone Line Busy

These are possible causes and solutions. Try one or more of the following:

CHANGE REDIAL SETTINGS

The printer automatically redials three times at two-minute intervals. You can change the default settings to redial up to five times at intervals up to eight minutes.

To change the redial settings:

1From the printer control panel, press .

2Press the arrow buttons until Dialing and Sending appears, and then press .

3To change the number of times the printer will redial:

aPress the arrow buttons until Redial Attempts appears, and then press .

bPress the arrow buttons until the setting that you want appears, and then press .

Troubleshooting

150