Lexmark 6600 Series, 5600 Series manual Automatic Document Feeder ADF tray, Orange

6

7

8

9

10

11

12

13

14

15

Use the	To
Automatic Document Feeder (ADF) tray	Load original documents in the ADF. Recommended for
	scanning, copying, or faxing multiple-page documents.
	Note: Do not load postcards, photos, small items, or thin
	media (such as magazine clippings) into the ADF. Place
	these items on the scanner glass.
Automatic Document Feeder (ADF) output tray	Hold documents as they exit from the ADF.
Automatic Document Feeder (ADF) paper guide	Keep paper straight when feeding into the ADF.
Printer control panel	Operate the printer.
Paper exit tray	Hold paper as it exits.
Memory card slots	Insert a memory card.
Quick Connect laptop port	Connect a laptop computer to the printer using a USB
Note: Your printer model may not have this port.	cable.
	Warning—Potential Damage: Do not touch the USB
	port except when plugging in or removing a USB cable
	or installation cable.
Card reader light	Check card reader status. The light blinks to indicate that
	a memory card is being accessed.
PictBridge port	Connect a PictBridge-enabled digital camera or a flash
	drive to the printer.
Wi-Fi indicator	Check wireless status:
Note: Your printer model may not have wireless	• Off indicates that the printer is turned off, is powering
capability and may not have this indicator.	up, or is in Power Saver mode. In Power Saver mode,
	the power light pulses on and off.
	• Orange
	– indicates that the printer has not yet been
	configured for a wireless network.
	– indicates that the printer is configured for an ad hoc
	connection, but is not communicating with another
	ad hoc device.
	• Orange blinking indicates that the printer is
	configured but is unable to communicate with the
	wireless network.
	• Green indicates that the printer is connected to a
	wireless network.

Setting up the printer

21