Using Macintosh

1Open the top cover, and then load an original document facedown on the scanner glass.

2Close the top cover to avoid dark edges on the scanned image.

3From the Finder desktop, double-click the printer folder.

4Double-click XXXX Series Center, where XXXX is the printer series.

5From the “What is being scanned?” menu, choose the type of document to be scanned.

6Click Scan.

Scanning color or black-and-white original documents

1Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.

Notes:

Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

Adjust the paper guide on the ADF tray to the width of the original document.

When using the scanner glass, close the top cover to avoid dark edges on the scanned image.

2From the printer control panel, press .

3Press the arrow buttons to choose where to send the scanned image. You can send the scanned image to a computer, flash drive, memory card, or to a computer over a network.

4When the destination that you want appears, press .

5To scan black-and-white documents, press Black.

Note: The default setting when you are using the Scan mode is Color. You do not need to press Color if you are scanning a color document.

6Press .

Scanning photos for editing

1Open the top cover, and then load an original document facedown on the scanner glass.

2Close the top cover to avoid dark edges on the scanned image.

3From the printer control panel, press .

4Press the arrow buttons until Computer or Network appears, and then press .

Note: If you choose Network, you will be asked to select a network computer. If prompted, press the arrow buttons until the network computer that you want appears, and then press .

Scanning

95

Page 95
Image 95
Lexmark 6600 Series, 5600 Series manual Scanning color or black-and-white original documents, Scanning photos for editing