Lexmark 5600 Series, 6600 Series manual Failed to Connect, 152

MAKE SURE THE PRINTER DETECTS DIAL TONE

•See the instructions for sending a fax while listening to a call (on hook dial).

•Check the Dial Method setting:

1 Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not recognize the dial tone.

2From the printer control panel, press .

3Press the arrow buttons until Fax Setup appears, and then press .

4Press the arrow buttons until Dialing and Sending appears, and then press .

5Press the arrow buttons until Dial Method appears, and then press .

6Press the arrow buttons until the dialing method that you want appears, and then press to save the setting.

Failed to Connect

These are possible solutions. Try one or more of the following:

USE PHONE LINE CHECKLIST

•Resend the fax. There may have been a problem with the quality of the telephone line connection.

•Place a test call to the telephone number to which you want to send a fax to make sure that it is working correctly.

•If the telephone line is being used by another device, wait until the other device is finished before sending the fax.

MAKE SURE THE PRINTER DETECTS DIAL TONE

•See the instructions for sending a fax while listening to a call (on hook dial).

•Check the Dial Method setting:

1 Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not recognize the dial tone.

2From the printer control panel, press .

3Press the arrow buttons until Fax Setup appears, and then press .

4Press the arrow buttons until Dialing and Sending appears, and then press .

5Press the arrow buttons until Dial Method appears, and then press .

6Press the arrow buttons until the dialing method that you want appears, and then press to save the setting.

Troubleshooting

152