Lexmark X644E manual Job

Using MFP menus

Menu item	Purpose	Values and descriptions
Timeouts		Print Timeout	Disabled—Disables Print Timeout.
(continued)		Disabled	1–255—Specifies the amount of time the
		1–255 (90*)	MFP waits for an end-of-job message before
			canceling the remainder of the print job.
			Note: When the timer expires, any partially
			formatted page still in the MFP is printed, and
			other input ports are examined to see if data
			exists.
		Wait Timeout	Disabled—Disables Wait Timeout.
		Disabled	15...65535—Specifies the amount of time the
		15...65535 (40*)	MFP waits for additional data before it cancels
			the job.
Print Recovery	Specifies whether the MFP	Auto Continue	Lets the MFP automatically continue from
	continues from certain offline	Disabled*	certain offline situations when not resolved
	situations, reprints jammed		within the specified time period.
		5–255
	pages, or waits until the entire		Disabled—Disables Auto Continue.
	page is processed and ready
			5–255—Specifies the amount of time in
	to be printed.
			seconds that the MFP waits.
		Jam Recovery	Specifies whether the MFP reprints jammed
		On	pages.
			On—The printer reprints jammed pages.
		Off
			Off—The printer does not reprint jammed
		Auto*
			pages.
			Auto—The printer reprints a jammed page
			unless the memory required to hold the page
			is needed for other MFP tasks.
		Page Protect	Successfully prints a page that may otherwise
		Off*	generate Complex Page errors.
			Off—Prints a partial page of data if memory is
		On
			insufficient to process the entire page.
			On—Ensures that an entire page is
			processed before it prints.
			Note: If, after selecting On, the page still
			cannot print, reduce the size and number of
			fonts on the page, or increase the installed
			printer memory.
			Note: For most print jobs, On is not needed.
			When On is selected, printing may be slower.
Printer Language	Specifies the default printer	PCL Emulation	PCL emulation—Uses a PCL interpreter for
	language used to	PS Emulation*	incoming host communications.
	communicate data from the		PostScript emulation—Uses a PS interpreter
	computer to the MFP.
			for incoming host communications.
	Note: This menu item is not
	available from the control
	panel. It is only available on
	the MFP Embedded Web
	Server.Setting a printer
	language as the default does
	not prevent a software
	application from sending print
	jobs that use the other
	language.

Settings

45