Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
TROUBLESHOOTING AND REPAIR | ||
|
|
FEED HEAD CONTROL BOARD
REMOVAL AND REPLACEMENT PROCEDURE (Continued)
Figure F.9 - FEED HEAD CONTROL BOARD LOCATION
FEEDHEAD CONTROL BOARD
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
REMOVAL PROCEDURE
1.Remove input power to the
2.Perform the Cover and Spindle
Mount Removal Procedure.
3.Locate the Feed head Control Board. and plugs J81, J82, J83, J84, J85, J86 and J88. See Figure F.9 & See Figure
F.10.
4.Remove the seven plugs from the board taking note of placement for reassembly.
5.Using the 3/8” wrench remove the four nuts holding the board in place.
6.Carefully remove the Feed head Control Board.
REPLACEMENT PROCEDURE
1.Set the new Feed head Control Board on the four mounting studs.
2.Secure with the four nuts previously removed.
3.Replace the seven plugs previously removed. See Figure F.10.
4.Replace the Cover and Spindle mount.
