Marantz PV6111W manual Basic Remote Control Functions, Infrared Transmitter Window Power

Basic Remote Control Functions

This remote control can be used to operate the Rear Projection TV, a VCR, a DTV STB Decoder, a DVD Video Player and a Cable TV converter.

The buttons that can be used differ according to the device connected. Please refer to the next page for details.

INFRARED TRANSMITTER WINDOW

POWER

Press → On.

Press again → Off. (Stand-by)

Remote control mode select buttons

Use to switch the remote control unit modes.

•By selecting one of the three mode select buttons, this remote control can be used to adjust common functions, such as channel selection, for that device.

PERSONAL PREFERENCE buttons										ENTER button
• Used to select any of four preset channels.
			POWER DTV				VCR/		DVD/	MENU
(See page 48 to setup.)					STB		TV		CATV
										Press → Accesses MAIN MENU.
Cursor buttons
					PERSONAL PREFERENCE					Press again → Exits MAIN MENU.
Used to move cursor on menu screen.				A B			C		D	(See page 17.)
VOLUME UP/DOWN										CHANNEL UP/DOWN
(+) Increases sound.						ENTER				(+) Selects the next higher channel.
(–) Decreases sound.										(–) Selects the next lower channel.
AV MODE				VOL					CH	INPUT
(See page 58.)							MENU			Press → Switches to external video
MUTE										INPUT 1 mode.
						AV MODE				Press again → Switches to external video
Press →	Mutes sound.						MUTE			INPUT 2 mode.
Press again → Restores sound.									INPUT	Press 3 times → Switches to external video
• CLOSED CAPTION appears when sound is muted.										INPUT 3 mode.
DIRECT CHANNEL ACCESS									ANT-A/B	Press 4 times → Switches to external video
										INPUT 4 mode.
Accesses any channel/inputs numbers by the keypad.									DISPLAY
										Press 5 times → Switches to external video
button: DTV Decoder only
							ENT. FLASHBACK			INPUT 5 mode.
										Press 6 times → Switches back to the
POP FUNCTION										original TV mode.
You can watch two pictures at the same time. (See
page 59.)										ANT-A/B button
-CH-	:	Used to switch the channel for the
										Press to switch between ANTENNA-A and
		sub-picture of the TWIN PICTURE
										ANTENNA-B when you wish to watch TV.
		screen.
INPUT:		Used to select the source from INPUT								DISPLAY
		terminals for the sub-picture of the
										Press → Displays receiving channel for
		TWIN PICTURE screen.				DDFC
										four seconds.
TWIN PICTURE: Splits the screen into two smaller
										Press again → Displays remaining time of
		equally sized screens, when pressed
										SLEEP TIMER and VIEW
		again, enlarges the left screen, and,
										TIMER for four seconds.
		if pressed again, exits the function.
										FLASHBACK
SEARCH:		Press to select the SEARCH
		screen mode.								Returns to previously viewed channel.
SELECT:		Selects the screen in TWIN								ENT.
		PICTURE and Search screen modes.
FREEZE:		When this button is pressed with								Used in some instances where a Cable
		the regular screen, will change to the								Converter Box requires an “enter”
		TWIN PICTURE screen and the								command after selecting channels, when
		picture at the time the button was								using the DIRECT ACCESS button. (See
		pressed will become the sub-picture,								page 63.)
		displayed as a frozen image.								Q-SOUND
SWAP:		The left and right screens are
		interchanged with the TWIN								Controls the surround settings.
		PICTURE function.								(See page 29.)
CM SKIP:		Use this function when you want to								VIEW MODE
		scan other channels during a								Select view size. (See page 57.)
LIGHT		commercial break.						VCR/DVD/DTV CONTROL
								(See pages 63 ~ 67.)
When this button is pressed, some buttons on the								DDFC
remote control unit will light. The lighting will turn off if no
operations are performed within about six seconds. This								Used to select High-quality image.
button is used for performing operations in dark places.								(See page 58.)
	•	The light button on the Remote Control glows in the dark. To use the glow-in-the-dark display on the remote control, place it
Note		under a fluorescent light or other lighting.

•The phosphorescent material contains no radioactive or toxic material, so it is safe to use.

•The degree of illumination will vary depending on the strength of lighting used.

•The degree of illumination will decrease with time and depending on the temperature.

•The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.

14