Marantz PV6111W manual Antenna Connections, Universal Remote Control, Antennas, Type of connector

Antenna Connections

•To fully utilize the various features provided, such as the 2-Tuner POP System, UNIVERSAL PLUS, and some connectors for high-quality VCR/DVD playback, set up this unit properly by following the procedures below.

Universal Remote Control

•The UNIVERSAL REMOTE CONTROL can be compatible with various VCR/DVD player and CATV converter brands by setting the correct control code.

UNIVERSAL PLUS

•The VCR/DVD input mode is selected by pressing the VCR/DVD player PLAY button on the UNIVERSAL REMOTE CONTROL.

•To use this UNIVERSAL PLUS function, the settings on page 49 must be set in advance.

Antennas

•The antenna requirements for good color Rear Projection TV reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

Type of connector

1. The 75 ohm system generally uses a round cable with an	F-type connector
F-type connector that can easily be attached to a terminal
without tools (not supplied). The F-type connector should
be finger tightened only.

2.The 300 ohm system uses a flat “twin-lead” cable that can be attached to a 75 ohm terminal through a 300-75 ohm ADAPTOR (not supplied).

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

•Switching between ANTENNA-A and ANTENNA-B is possible by pressing the ANT-A/B button on the remote control.

•A good color picture depends on a good TV signal, and so does good multi-channel sound. Ask your dealer for advice on how to install your external antenna to receive the best possible signal.

•If you subscribe to Cable TV or have a central antenna in your building, you may not need an external antenna.

A-1. Connection with Converter/Descrambler Box and VCR

Coaxial Cable (Not supplied)

Back of Rear Projection TV		75
			ANT-A
		OUT	ANT-B
			R AUDIO L	VIDEO
		MONITOR OUT
		(EXCEPT FOR HD AND
		COMPONENT SIGNALS)
			IN 1	IN 3
			S-VIDEO
			IN 1
	COMPONENT		IN 3
	Y	PB PR
	IN 4
HD INPUT IN 3	IN 5
(USE FOR HDTV SIGNAL ONLY)
	CENTER IN		VAO R AUDIO L	VIDEO
		R AUDIO L

Coaxial Antenna Cable (Not supplied)

		2-way
		signal
		splitter
		(Not
OUT	IN	supplied)
		Cable lead-in
Cable TV converter
(Not supplied)

Coaxial Antenna Cable (Not supplied)

S-Video Cable (Not supplied)

	VCR
or	S-VIDEO VIDEO AUDIO OUT IN
	R L

Video Cable (Not supplied)

Audio Cable (Not supplied)

• Shown here is the preferred method of connecting a VCR and CATV Converter to your Rear Projection TV if you are in

Note an area with good signal reception. This way you can view either TV programs or VCR tapes regardless the position of the VCR’s TV/VCR switch and you can enjoy stereo tape playback from a stereo VCR.

•If your VCR has an S-VIDEO or S-VHS OUT connector, you can connect it to the S-VIDEO IN 1, IN 2 (on the front of the Rear Projection TV) or IN 3 connector on the Rear Projection TV in addition to or instead of using the video cable.

9