Maytag AGR4400ADW, CPL1100ADH/L/Q/T/W Range Adjustments, Top Section - Gas Top Pilot Adjustment

Conversion Instructions (Model CPR1100AD*)

Range Adjustments

Top Section - Gas Top Pilot Adjustment

See figure 5.

Purge all air from supply system by turning on one top burner valve. Then turn off valve and adjust top pilot flame using adjusting screw “A” (figure 5) so that flame is even with top of flash tube. To light the burner, push and turn top burner knob to the lite position.

TOP OF FLASH TUBE

FIGURE 5

Top Section - Electric Ignition

To operate, push and turn burner knob to the LITE position. The top burner will light. To turn OFF spark after the top burner has ignited turn knob to HI setting.

Top Burner Adjustment

All Top Burner Valves:

The approximate height of the flame at the high or full-on position is shown below. Adjust burner air shutter (figure

6)to the widest opening that will not cause the flame to lift or blow off the burner when cold.

AIR

SHUTTER

3/4￿ FLAME

ORIFICE

HOOD

Conventional Burners

FIGURE 6

Air Shutter - Oven Burner

a. The approximate length of the flame of oven burner is a 1/2￿ distinct inner blue flame (see figure 7).

b. Oven burner flame can be checked as follows:

1.Yellow flame on burner - open air shutter to the widest opening that will not cause the flame to lift or blow off the burner when cold. (See figure 8).

2.Distinct blue flame but lifting - close burner air shutter to the point where it will not cause the flame to lift or blow off the burner when cold. (See figure 8).

1/2￿ FLAME INNER CONE

FIGURE 7

c.The oven burner air shutter adjustment is the same on ranges with a gas pilot or electric ignition.

LOCK SCREW

AIR SHUTTER

ORIFICE HOOD

FIGURE 8

©2004 Maytag Services 16023522 C–7