TereScope™ Management
In order to optimally integrate the TereScope™ Wireless Optical links into complete network solutions, the TereScope™ products are SNMP manageable. Each of the two transceiver units of the wireless optical link is equipped with a separate management 10 Base T interface. Through this interface TereScope™ systems can be managed through Optical Access MegaVision™ SNMP Web Based management software as indicated in the picture. On each managed parameter thresholds can be set and alarms can be logged.
The following data can be obtained through the management GUI:
General Device parameters:
Product Type
MAC address
UDP port #
IP Address
Communication mode
Gateway address
Software version
Hardware version
Management port type
Wirelink port type
Managed parameters
RSSI Description:
Laser Rx Signal Strength Indicator in voltage.
Include thresholds for up/down limits and alarms notification with different severity.
BIAS Description: System BIAS value.
Include thresholds for up/down limits and alarms notification with different severity.
Internal Temp
Description:
Temperature inside the System.
Include thresholds for up/down limits and alarms notification with different severity.
