MegaVision Classic under HP OpenView Windows
The following directions describe how to install a MegaVision for HP OpenView for MS- Windows. Following that are instructions for adding a device, which is necessary before you can access the device with MegaVision.
Before you install MegaVision software, you must have
Under the
When the software has completed the installation, select the OpenView group in the Program Manager window and Run the HP OpenView application. MegaVision starts automatically.
To define a new device with HP OV
1.Select Add from the HP OV Edit menu. The Add window opens.
2.Select Components in the
3.Drag and drop the device icon to the HP OpenView map window. The device icon is added to the map and a MegaVision Describe window opens. See “Adding and Deleting Devices, Describe Window” section for additional information.
4.Click OK to return to the HP OpenView main window. A submap with the newly defined device icon displays. The device icon in the submap is colored, according to HP OpenView color codes to reflect the current device status. From this point on, the windows are as described for the MegaVision standalone version, with the exception of the submap window. To open the device main window,
5.For more information on running HP OpenView, refer to the HP OpenView user manuals.
IMPORTANT! If you are using HP OV Autodiscovery:
After all the devices are discovered and added to the map:
1.Close discovery process.
2.Save the map.
3.Open the same map again:
Note that otherwise MegaVision will not get information about newly discovered devices.
