Adding and Deleting Devices. Describe Window.
Before you can manage a device, you must first define the device, provide parameters to establish communication, and select an interface. Only the SUPERVISOR may add devices and modify their attributes. Please note that you may add devices either manually or using Autodiscovery function (see the Autodiscovery section later).
Adding Devices Manually.
MegaVision requires specific parameters to establish communication with a device. You must supply a name and address, specify communication type, enter polling durations, and SNMP community names.
In order to add device manually:
1.Select Add from the Main Window menu Edit item. The Devices Types window opens:
Figure 35. Devices Types Window
2.Select a desired device type. Choose GENERIC for any unsupported SNMP device. Choose TCPIP for any device, which does not support SNMP. Choose SUMBAP in order to add a new map/submap to the current map.
3.A Describe window for the device opens.
