Page 100 of 174 Installation
553-3001-216 Standard 5.00 January2002
To remove the HookSwitch cover:
1Easethe cover to the left and pull on the left side to release the left
snap.
2Whileholding the left snap out, ease the cover to the right and pull on
theright side to release the right snap.
3Carefullymaneuver the cover out from the three bottom slots and
rotatethe cover to release the two side tabs.
Toinstall the cradle:
1Holdthe cradle in the same position as when you removed the Hook
SwitchCover;movethecradletotherighttoplacethetabintotheslot.
2Easethe other tabs on the bottom edge of the cradle into the slots.
3Whenall tabs are in the proper position, secure the cradle into place
bypushing straight downward.
Figure17
Installationof the cradle
553-9048