Page 130 of 174 Appendix A: Flash Download procedure
553-3001-216 Standard 5.00 January2002
Overlay 32

Tou se the Flash Download capability, load Overlay 32 and issue the

following commands:

FSTN lscu
cu
Startingterminal number for Flash Download.
Promptappears only if FTNR = YES.
FETN lscu
cu
Endingterminal number for Flash Download.
Promptappears only if FTNR = YES.
FDNR
(NO)
YES
DNrange restriction option for Flash Download.
NoDN restriction(default).
SpecifyDN range.
FDDN cd1d2
<CR>
FlashDownload Prime Directory Number range.
Promptappears only if FDNR = YES.
c= Customer number (0-99)
d1= starting Prime DN
d2= ending Prime DN
FRCE
(NO)
YES
System-wideFlash Download control option
Conditional(default). System-wide Flash Download
(throughFDLS in LD 32) applies only to an M3900 series
setwhose flash firmware version is different from the
versioncurrently found on the system disk.
ForcedSystem-wide Flash Download to all specifiedM3900
seriessets regardless of their current flash firmware
versions.
Note1: Usethis option with caution! Once the download tree is
built(i.e., after executing FDLS in LD 32), this option automatically
revertsto NO.
Note2: Thisoption is not applicable to reporting.
FVER
v
Flashfirmware version specified for full report.
v = Flash firmware version (0-99)
If0, report all versions (default).
Note: Thisoption is applicable to reporting only (throughFSUM
ALLinLD32).