Configurethe M3900 Series Meridian Digital Telephone Page73 of 174
M3900Series Meridian Digital Telephones Description,Installation and Administration
Commands in LD 32 to support the Flash Download feature

LD 32 – Flash Download commands (Part 1 of 2)

Prompt Response Description
.FDLUl scu Initiateconditional download to one telephone.
Terminalnumber.
l= loop address.
s = shelf address.
c= card address.
u= unit address.
FDLIl s cu Initiateconditional download to an M3900 Series telephone
whenit becomes idle.
FDLFl s cu initiatea forced download to an M3900 Series telephone
regardlessof its version and state.
FWVUl scu Queryand print the firmware versions currently on an M3900
Seriestelephone.
FDLS Initiatesystem-wide flash download to all, or a specified type of
M3900Series telephones, based on parameters specified in LD
97
FDLC Cancel or gracefully stop the system-wide flash downloa df or
M3900 Series telephones.
FSUM Displaysummary report of current firmware versions on all
M3900 Series telephones.
Theformat of the report is as follows:
** M390x SUMMARY REPORT * *
dd - ON DISK
ff(cc) - nnnn SETS FOUND
ff(cc) - nnnn SETS FOUND
Where:
x=2to5forM3902toM3905
dd= the flash firmware version found on the system disk
ff= the downloadable flash firmware version found on the sets
cc= the core firmware found on the sets
nnnn= the number of sets found with firmware version ff (cc)