Page74 of 174 Configurethe M3900 Series Meridian Digital Telephone
553-3001-216 Standard 5.00 January2002
M3900 Series key descriptions
Thissection provides key description and key configuration information for
eachmodel of the M3900 series. This section also shows the physical
placementof the keys on each model: M3901, M3902, M3903, M3904, and
M3905.

M3901 key descriptions

Table8 gives a description of the keys on the M3901. Figure 7 shows the
physicalplacement of the keys on the M3901.
FSUMALL Displaya complete report on all M3900 Series telephones
basedon parameters specified in LD 97.
Theformat of the report is as follows:
TYPE:tttt CUST:cc PDN: ddddddd TN: l s c u FW: vv
Where:
tttt= 3902, 3903, 3904 or 3905
cc = 0-99
ddddddd= the Primary DN of the telephone
vv= the flash firmware version
Table 8
M3901 key description
KeyNumber Description
Key 0 Line(Directory Number).
Note: Thesystem adm inistrator can configure Key 0 as a Voice Call (VCC),
HotLine(HOT) Key, Single Call Non-ringing, Private Line Non-ringing, Multiple Call
Non-ringing,Private Line Ringing, or Multiple Call Ringing.
Key 1 Featureor Auto Dial.
Key 2 Featureor Auto Dial.
Key 3 Featureor Auto Dial.
LD 32 – Flash Download commands (Part 2 of 2)
Prompt Response Description