
Page24 of 174 Functionaldescription
553-3001-216 Standard 5.00 January2002
Set-to-SetMessaging Enhancements for Phase III sets allow the system
administratorto predefine ten messages for the M3903, M3904, and M3905
sets.The telephone user can select one of the messages as their set-to-set
message.The telephone user can also edit a message before selecting it as
theirset-to-set mes sage.
Whenthe system administrator chooses the system- initiatedlan guage for the
M3900sets, the list of ten predefined set-to-set messages for that language is
loaded into memory from the hard disk.
Whenthe predefined messages are in memory, the system administrator can
customizethem for a particular customer group.
Note: Eachcustomer group on the Meridian 1 system can have its own
defaultlanguage and list of predefined set-to-set messages for its end
users.
When as et has Set-to-SetMessaging Allowed (STSA) Classof Service
defined,the user can select and edit any of the ten messages listed in Table 3.
However,only one of the messages is stored as the user’s set-to-set message.
Theuser presses the Up and Down navigation keys to scroll through the list
of predefined messages. When scrolling down, the list wraps from message
tento message one. When scrolling up, the list wraps from message one to
message ten.
Table 4
Predefinedset-to-set messages
Message# Message
1 Pleaselea ve message
2 Backtowork
3 Ina meeting
4 Ona conf erence call
5Atlunch
6 Busy,call