Page96 of 174 Installation
553-3001-216 Standard 5.00 January2002
2Place the telephone and the Module face down on a padded, level
surface, and align them.
3Plugthe cable from the Module into the 10-pin connection port on the
telephone.See Figure 14.
Figure14
KBAInstallation
4Threadthe cable through the opening in the side of the telephone.
5Insertthe clips on the telephone into the hinges on the footstand;then
presson the front of the footstand until it snaps into place.
6Install the Single KBA Footstand Assembly. S ee Figure 15.
Tilt Handles
ACM
connection
port
Clips
Plug cable into10-pin
connection port
553-9538