Configurethe M3900 Series Meridian Digital Telephone Page57 of 174
M3900Series Meridian Digital Telephones Description,Installation and Administration
Configure the M3901, M3902, M3903, M3904,and M3905 telephone

LD 11 – Configurethe M3900Series Digital Telephone (Part 1 of 4)

Prompt Response Description
REQ: NEW
CHG
New data.
Changecurrent data.
TYPE: x..x Typeof telephone.
3901= M3901.
3902= M3902.
3903= M3903.
3904= M3904.
3905= M3905.
3903H= M3903 Host Terminal.
3904H= M3904 Host Terminal.
3903V= M3903 Virtual Terminal.
3904V= M3904 Virtual Terminal.
Note2: The M3903, M3904, and 3905 telephones only s upport the Host
Terminaland the Virtual Terminal feature.
Note3: If the M3901, M3902 or M3905 are configured as a Virtual Terminal,
theerror message S CH0099 is output.
Note4: M3903, M3904, and M3905 are the telephone t ypes supported for
CorporateDirectory and S et-to-Set Messaging.
TN
lscu
cu
Terminalnumber.
l= loop address. If confirmed as 3903V or 3904V, the loop must be a
phantom.If confirmed as 3903H or 3904H, the loop must NOT be a
phantom
s= shelfaddress.
c= cardaddress.
u= unitaddress.
ForOption 11C, input only the card and unit address. If confirmed as
3903Vor 3904V the card must be a phantom (card slots 61-80).
Note: Ifthe telephone has an AnalogTerminal Adapter (ATA), then use the
voiceTerminal Numbers 16-31.
... ... ...