Meridian Audio M3900 LD 97 Configureparameters for System-wide Flash Download (Part 2 of 2)

Configurethe M3900 Series Meridian Digital Telephone Page71 of 174
M3900Series Meridian Digital Telephones Description,Installation and Administration
FTNR (NO)
YES
<CR>
TNrange restriction option for Flash Download
NO= no TN restriction (default)
YES= specify TN range
FSTN lscu
cu
Startingterminal number for Flash Download
Promptappears only if FTNR = YES.
FETN lscu
cu
Endingterminal number for Flash Download
Promptappears only if FTNR = YES.
FDNR (NO)
YES
<CR>
DNrange restriction option for Flash Download
NO= no DN restriction(default)
YES= specify DN range
FDDN cd1d2
<CR>
FlashDownload Prime Directory Number range
Promptappears only if FDNR = YES.
c = Customernumber (0-99)
d1 = starting Prime DN
d2= ending Prime DN
FRCE (NO)
YES
<CR>
System-wideFlash Download control option
NO= Conditional (default). System-wide Flash Download (via FDLS
inLD 32) applies only to an M3900 series set whose flash firmware
versionis different from the version currently found on the system
disk
YES= Forced. Force System-wide Flash Download to all of the
specifiedM3900 series sets regardless of their current flash firmware
versions.
Note1: Use this option with caution! Once the download tree is built (i.e.,
afterexecuting FDLS in LD 32), t his option automatically reverts to NO.
Note2: This option is not applicable to reporting.
FVER v
<CR>
Flashfirmware version specified for full report
v = Flash firmware version (0-99)
If0, report all versions (default).
Note: Thisoption is applicable to reporting only (via FSUM ALL in LD 32).
LD 97 – Configureparameters for System-wide Flash Download (Part 2 of 2)
Prompt Response Description