Page 148 of 174 Appendix A: Flash Download procedure
553-3001-216 Standard 5.00 January2002
Test Core/Net 1
1TestCall Processing. This includes, but is not limited to the following:
a. Checkfor dial tone.
b. Makeinternal, external, and n etwork calls.
c. Check attendant console activity.
d. CheckDID trunks.
e. Check any auxiliary processors.
Note: Fromthis point forward you will be upgrading Core/Net 0.
Install software on Core/Net 0
1Movethe CPSI port cable from J25 on Core/Net 1 to J25 on Core/Net 0.
2Setthe IO DU/Cfaceplate swit chto ENB.
3Placethe CP Install disk that corresponds with the installed CP card type
into the IODU/C in Core/Net 0.
a. Press the button on the CD-ROM drive to open the CD-ROM disk
holder.
b. Placethe CD-ROM disk into the holder with the disk label showing.
c. Usethe four tabs to secure the CD-ROM drive.
d. Pressthe button again to close the CD-ROM disk holder (do not
pushthe holder in by hand).
4Presst he MAN RST button on the CP card in Core/Net 0 to reboot the
system and start the Software Installation Tool. (The terminal displays
SYSLOADmessages during file loading. When SYSLOAD is
completed,the NT logoappears.)
5Whenthe NT logo appears, press <CR> to continue.
6Whenthe Main Menu appears, select the following options in sequence:
<u>to Installmenu