Micro Innovations M000174-19 manual Screen Setting Display, Dim Value

Windows CE System settings

4.3.3COMMAND LINE PARAMETERS

The command line call is described in chapter 4.1. The following parameters are supported:

Parameter	Description
-id [Time Zone ID]	Set time zone according to the Time Zone ID, e.g. -id 6912
	The Date/Time dialog of the Time Zone tab shows the time zone IDE of the
	selected time zone.

4.4SCREEN SETTING (DISPLAY)

4.4.1BACKLIGHT

This program can be used to set the backlight to the required value. The setting made is stored as persistent data, i.e. it is retained even after a restart.

The lower values such as 40 and 60 % are «stand by» values and are not therefore intended for normal operation. The reduction of the backlight increases the lifespan of the backlight (tubes).

Note:

The supported percentage values depend on the device concerned.

Dim Value

This is the dialog to select the appropriate dim value of the backlight. An activation of the screen saver reduces the backlight to this dim value. The screen saver is part of the HMI program.

Use the arrow buttons to set the required dim value and touch Save to store the value as persistent data.

4.4.2CONTRAST

This program is used for setting the screen contrast. The «Middle» setting is the factory setting. Touch «Save» to save the selected setting as persistent data, i.e. the value is retained even after a restart.

Note:

This setting is not required for devices with an active display (TFT technology) and is therefore not available.

M000174-19 23