System settingsWindows CE

IP classes

The private IP address ranges of classes A, B and C are listed in the following table.

 

Private IP address ranges

Standard subnet mask

Class A network

10.0.0.0 to 10.255.255.255

255.0.0.0

Class B network

172.16.0.0 to 172.31.255.255

255.255.0.0

Class C network

192.168.0.0 to 192.168.255.255

255.255.255.0

Note:

All of the above listed address ranges (compliant with RFC 1918) are not available on the Internet, i.e. they are reserved for private use. If you do not have an official IP address, only use these private address ranges!

Notes on the Subnet mask

The program only allows valid subnet masks. A valid subnet mask must consist of a contiguous series of 1 bits followed by 0 bits. At least the MSB (Bit 32) must be 1 and LSB (Bit 0) 0 in order for the mask to be valid. See also the previous chapter IP Classes.

Examples of invalid subnet masks:

Binary format:

 

255.255.255.255

1111 1111.1111

1111. 1111 1111.1111 1111

0.0.0.0

0000 0000.0000

0000.0000 0000.0000 0000

255.255.15.0

1111 1111.1111

1111.0000 1111.0000 0000

 

*MSB: Far left in the table above

 

*LSB: Far right bit

4.7.2 DNS

 

 

Ask your network administrator about DNS or set the addresses 0.0.0.0 for «Primary DNS» and «Secondary DNS».

4.7.3WINS

Ask your network administrator about WINS or set the addresses 0.0.0.0 for «Primary WINS» and «Secondary WINS».

30

M000174-19

Page 30
Image 30
Micro Innovations M000174-19 manual System settingsWindows CE, IP classes, 192.168 .0.0 to 192.168