Programs | Windows CE |
7.8.3FILE SERVER START/STOP
The file server is started by default. The file server must be restarted after registry entries are changed. The file server can be started and stopped with the program services.exe. The possible command line calls are listed in the table below:
Functionality | Call |
File server restart | Services.exe refresh SMB0: |
Start | Services.exe start SMB0: |
Stop | Services.exe stop SMB0: |
Display status | Services.exe list |
7.8.4SAMPLE SETTINGS
The settings for the file server can be set as follows in a REG file (see also chapter Autoexec.reg):
[HKEY_LOCAL_MACHINE\Services\SMBServer\Shares\SampleVRoot] "Path"="\\InternalStorage\\Data"
"Type"=dword:0
"UserList"="AnnD;GladysL"
The registering of the users and the restarting of the file server must be carried out after the registry keys are set (see also chapter Autoexec.bat):
useradmin.exe
7.8.5ACCESS TO THE ENABLE:
The enable can be accessed from a different device by stating the panel name and the enable name: e.g. \\MI_xxxxxx\SampleVRoot
Access from a PC is also possible using the IP address of the panel: e.g. \\192.168.1.1\SampleVRoot
7.8.6NOTE FOR USERS OF NEWER WINDOWS VERSIONS
From Windows Vista the LAN Manager authentication level must be set to “Send LM & NTLM
Further information is provided in the chapter Name resolution in Windows networks.
Alternatively, this setting can also be changed with the following registry key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa] "lmcompatibilitylevel"=dword:00000001
7.8.7USE WITHOUT AUTHENTICATION
When accessing from a panel without authentication, the entry of a user name may nevertheless be requested. In this case, any user name (e.g. MI_PANEL) can be entered. The next enable access will then no longer request a user name and the access will function normally. The same procedure applies after a “disconnect” of the connection.
This strange behavior seems to be a characteristic of Windows CE 5.0. Use without authentication is therefore not recommended.
64 |
