Windows CE | Programs |
7.10.2SAMPLE SETTINGS
The settings for the SNTP client can be set as follows in a REG file (see also chapter Autoexec.reg):
[HKEY_LOCAL_MACHINE\Services\TIMESVC] "server"=multi_sz:"swisstime.ethz.ch","thrad.cybernet.ch" "AutoUpdate"=dword:1
"ServerRole"=dword:0
"refresh"=dword:927C0
"recoveryrefresh"=dword:57E40
"threshold"=dword:5265C00
Notes on the above example:
•The entries with «dword» are in hexadecimal format.
• "refresh"=dword:927C0 | corresponds to 10 minutes in milliseconds (10*60*1000) |
•"recoveryrefresh"=dword:57E40 corresponds to 6 minutes in milliseconds (6*60*1000)
• "threshold"=dword:5265C00 | corresponds to 1 day in milliseconds (24*60*601000) |
The settings for the SNTP client can be stored in a REG file SNTP.REG and started in the Autoexec.bat file as follows:
REM Verify boot device, if parameter is not
REM available, the boot device is StorageCard
SET bootdev=StorageCard
IF "%1" == "" GOTO START
SET bootdev=%1
IF exist \%bootdev%\sntp.reg CALL regedit.exe "\%bootdev%\sntp.reg" "/Q" services.exe refresh NTP0:
7.10.3START/STOP/REFRESH OF THE SNTP CLIENT
The SNTP client is started by default. The values for a time synchronization are not set in the default setting.
The SNTP client is prepared by setting the appropriate registry entries. The services.exe program transfers the new registry entries to the SNTP client. The possible command line calls are listed in the table below:
Functionality | Call |
Restart of the SNTP client with actual registry | Services.exe refresh NTP0: |
entries |
|
Start | Services.exe start NTP0: |
Stop | Services.exe stop NTP0: |
Status: Display of the current status | Services.exe list |
67 |
